Price is for hull and machinery, as-is. 50-meter yacht.
This 50-meter hull has been built and all the motors and systems have been bought and await installation to new owner's specs. This is a tremendous opportunity to get a custom yacht with very quick delivery time and high degree of customization.
The Yacht is an oceangoing high class luxury explorer motor yacht, of full displacement type, with round bilge hull, transom stern and semi flared bow, with welded steel hull with transverse watertight bulkheads and aluminum superstructure. Propulsion is provided by twin diesel engines, directly coupled to shafts and fixed pitch propellers, via reversing gearboxes and thrust bearing.
The Yacht is designed by Vripack as a luxury yacht for worldwide cruising, for 12 passengers, according to Flag State authority’s regulations and in this respect has the appropriate seakeeping, maneuverability, general handling characteristics, standard of comfort, safety systems and equipment reliability required to achieve this capability.
The project be built-out at LUSBEN in Livorno, Italy (the re-fit division of BENETTI) and more length can be added to become either 54-meters or 60-meters. Plans exist for both options.
All machinery is of first class marine type, from suppliers that have a world wide service network. The amount of suppliers is reduced to a minimum, to increase reliability of after market support.
Standard materials and equipment will be used as far as practicable, if not otherwise mentioned, in order to achieve easy and low maintenance costs.
The Yacht is a five deck design, plus tank top, with a deck layout as follows:
Crew accommodation is provided for max 12 crew members.
The net deck internal heights are not less than 2.10 m.
The quality of workmanship at LUSBEN will be to the highest standards of European Explorer yacht construction, together with the use of highest quality materials.
This is a project that is ready to go. VRIPACK Engineering and build-out has been planned by VriPack. It is budgeted for completion at LUSBEN in Livorno, Italy. A full-custom interior can be designed and installed for new owner.
For Viewings please contact:
Mr. Jimmy Frangi
(m): +30 699 9965999
This vessel, including its machinery, equipment and outfitting, has been constructed in accordance to the rules and regulations of American Bureau of Shipping allowing it to obtain the Class Notation:
Maltese Cross A1 (E), Commercial Yacht, Ice Class D0, Maltese Cross AMS
The following rules and regulations are met:
The following rules and regulations are also complied with as applicable:
Amendments, as applicable (MARPOL)
Upon completion of the Motor Yacht the Builder will supply, in duplicate, all Registration, Classification and
Statutory Certificates as set out below:
Equipment, machinery and outfitting are as per the following list:
This is a list of equipment that comes with vessel, in its current condition - unfinished.
Α. Metallic Hull Structure
A1.Steel Hull (Grade A) metallic structure of a total weight of about 280 Metric Tons.
A2. Aluminum superstructure (5083 for the plates and 6082 for the profiles) metallic structure of a total weight of about 40 Metric Tons.
Β. Materials Installed or Stored
B1. One (1) Bow Thruster type KT‐150, maker KORT PROPULSION LTD., welded on the hull.
Β2. Two (2) Main Propulsion Engines, type 16V 2000M70, maker MTU, with serial nos 536109838 and 536109839, with flanged type gearboxes type 3350, maker ZF.
Β3. Two (2) main engines silencers type SM40P, DN300.
Β4. Three (3) diesel generators, type C6.6, maker CATERPILLAR, Power 125 kWe (156 kVA)
/ 50 HZ / 380 V, with serial nos C6T00267, C6T00268 and C6T00269.
Β5. One (1) emergency diesel generator, type C4.4, maker CATERPILLAR, Power 49 kWe / 50 HZ
/ 380V, with serial no S1M03537.
B6. One (1) complete electrohydraulic steering gear system for two rudders, type DDS
1600, maker DATA HYDRAULIC MAKINA SANAYI A.S.
Β7. One (1) complete electrohydraulic stabilizing system for two fins, type QC1800, maker
Β8. One (1) Sewage Treatment Plant, type HL‐CONT PLUS 02 SLIM, maker HAMANN AG.
Β9. Twenty (20) Marine Type WC bowls, type 910, Maker EVAC.
B10. One (1) Vacuum System for the black water system, type ON LINE FLEX, Maker EVAC.
Β11. Stainless Steel Pipes and fittings for the black and grey water system, maker BLUCHER,
Β12. One(1) complete fire suppression system, type HI FOG, Maker MARIOFF.
Β13. One (1) Bilge Oil Separator, type POSEIDON EVO 1.0 BM, Maker E.P.E.
Β14. Two (2) Watermakers, type ALIOS EVO 10.0, Maker E.P.E.
Β15. One (1) Diesel Oil Separator, type MAB103, maker ALFA LAVAL
Β16. Two (2) Galvanised Steel Chains, d:22mm, 120 meters each.
SSH Maritime offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
2a Areos & Thisseos Street