This converted Port Alberni trawler was originally built at the Port Alberni Engineering boat yard. She was a fishing vessel for many years before she was converted into a live-aboard vessel. The conversion has been very tastefully done with all the comforts of a pleasure cruising vessel. A fantastic live aboard or a West Coast cruiser, she is ready for the next chapter with a discerning owner that appreciates the craftsmanship of a wood vessel. A recent survey with items that were taken care of available. Please call for an appointment as the vessel can be moved to our dock for showings.
Standard Horizon Chart CP 500
Furuno LS 4100 Sounder
Standard Horizon VHF radio
120 volt shorepower outlet
Magnum Sine Inverter/Charger
12 & 24 volt DC systems
Batteries; 8) 6 volt lead acid. 2) Group 31 lead acid
Dickerson Mediterranean model stove
Breville toaster microwave
Nova Kool upright refrigerator/freezer
Single Stainless steel sink
Dickerson BBQ on exterior
2) 145 gallon painted steel fuel tanks
120 gallon Stainless steel & 44 gallon plastic water tanks
10 gallon hot water tank
2) 44 gallon Black Water tanks w/ 12 V macerator
2) Rule 2000 diaphragm bilge pumps
High water alarm
Engine driven bilge/fire pump
Detroit 653 6 cylinder diesel engine with 7369 reported hours
Dry exhaust w/ keel cooling system
Twin Disc M5 505 2:61 ratio gearbox.
Single wood skeg hung rudder.
2 7/8" Stainless steel shaft
East hope type stern gland
3 blade 34" RH 21 propeller
Fixed fin steel type and pole type stabilizers.
7 kW Cummins Onan generator w/ 350 hours
Diesel heat from Dickinson heater
Large covered cockpit at the stern of the vessel.
Entry from the rear into main salon with long settee on the port side and diesel stove on the starboard side.
Main head on port side just aft of the the dinette seating. Refrigerator to starboard with galley, stove and sink.
Helm offset to port with stairway on the starboard side.
Sleeping berth in the fore-peak with a head & sink.
Engine access is from the forward berth.
Length Overall 42'
Displacement 14.5 tonnes
Beam 11' 7"
Planks on the hull 1 1/2" thick fir carved planked hull on white oak 3" X 2"
ribs spaced on approx. 10' centers.
Double planked at the waterline. 4) 4" x 4" bilge stringers
Carlins = 5 1/2", Beams 3.5" on 13" centers with galvanized fasteners.
Propane vapour detector
3-5 ABC type fire extinguishers & Automatic Fire Suppression system
10' Aqua Pro RIB inflatable w/ Mercury 9.9 hp OB
J. Swann hydraulic reel winch w/ 50 lbs. Horthilk anchor