Full description
Recent Upgrades:
Brand new Eisenglass enclosure
Brand new Furuno TZT3 19” at the helm and Furuno TZT3 12” on the tower.
Complete paint job 2019 in Awlgrip 2000 Ice Blue hull, white decks, all Faux painted toe rails, Transom and Helm Pod. Bottom soda blasted, barrier coat applied and running gear dailed in. New dripless shaft seals.
New refrigeration systems by Murry Marine 2018: to include addition of refrigerated drink box.
Tower Modifications by Palm Beach towers: folding Buggy top, addition of bench style seat in tower, reposition of dredge rod holders.Full enclosure with EZ2CY by Wycap Dec 2020
Bluewater Ladder back chair, rocket Launcher and fighting chair sent out for refurbishment 2018
Additional rod holders added in stern as well as 2 Dredge rod holders installed
Outriggers modified to break-back and arms upgraded as well new halyard systems
New Head installed
New Flooring
New Headliner
Addition of custom rod storage in cabin under pullman berth and in closet by Merritts
New Tower lights
New Underwater Lights
New Fusion Stereo System
New AGM Batteries
Spare Props
New bow deck hatches
12 Volt Kite/deep drop outlets under covering boards
Full Description:
Hull: Modified-V, planing type, with slightly flared bow, tumblehome transom, hard chines and spray-rails. Vacuum Bagged Core-Cell Closed Cell PVC Foam cored hull and High Density Core-Cell Closed Cell PVC Foam Cored spray-rails, sandwiched with 1708 & 1808 alternating fiberglass laminates and Vinylester skin coat. Ice Blue Awlcraft 2000 type painted hull with blue painted boot stripe and white Awlcraft 2000 type painted decks and bridge.
Deck Closed Cell PVC Foam cored FRP (fiber reinforced plastic) foredeck, bridge deck, cockpit deck, cockpit cap-rails, and bridge sides, with white paint and textured non-skid surface. Teak cockpit deck overlay. Varnished faux mahogany toe-rails, tapered. Fiberglass compression rails with stainless steel striker strips. Murray Products Teak ladder back helm chair and bridge bench seating, all with vinyl cushions.
Exterior lighting Tower spreader lights, cockpit under-gunwale lights, deck courtesy lights and underwater lights.
Boxes Insulated iceboxes with shower wand installed in the starboard bin.
A raised fish box integrated into the centerline transom.
Tower Pipe-welded aluminum Tuna Tower by Bausch American Towers, with fiberglass bridge hard-top, aluminum tower platform.
Outriggers Rupp Marine, single spreader anodized aluminum outriggers.
Rod Holders Rod holders were installed in the gunwales, rocket launcher and aft tower legs, with additional custom rod storage in the cabin.
Live wells An in-deck, flooded live bait-well with Shurflo circulation pump located centerline in the aft cockpit.
Wash Down A raw water wash down is located in the starboard forward cockpit locker.
Main Cabin Main cabin Convertible Sofa/Pullman Berth.
GALLEY The Galley is located port forward amidships in the main cabin.
Head Jabsco 12 volt Head. Integral shower in the Head.
Lighting 12 volt DC lighting fixtures throughout the vessel
HVAC/AIR CONDITIONING SYSTEM One (1) Marine Air unit with rotary controls.
GALLEY SINK Stainless Steel sink.
Engine Twin, Cummins Marine QSB-5.9, 5.9 Liter (359 cid) Reconditioned. Turbocharged & Aftercooled with Airseps. Port manufactured: 02/03/15. Starboard manufactured: 01/22/15. 380 horsepower each @ 3,000 RPM. Six (6) in-line configuration
Direct drive system
Electronics
Furuno TZT3 19” at the helm and Furuno TZT3 12” on the tower.
Furuno PSU012 power supply
BBWX4 Satellite weather receiver
VHF radios Two (2) Standard Horizon Quantum GX5000S VHF Radios.
Compasses Ritchie 4" and 3.5" Compasses.
Display
19” Furuno multifunctional display
Autopilot
Furuno Navpilot-711c
Generator
Northern Lights M673D.3
(remove)
2012
Pearl
60
2002
Garlington
Flybridge
1995
Seavee
290 Rebuilt '15 Repowered '20
2006
Contender
31 Open
1966
Pearson
Vanguard
2008
Pro-Line
20 Sport W/ '19 Trailer
