Polluting nothing. Not the Air. Not the water. Not your ears.
Environmentally accurate and evoking a sense of leisure and elegance of an era gone by, Brookins electric powered launches are esthetically and thematically appropriate for a variety of eco-tourism settings and applications.
ELECTRA was designed and built specifically as a water taxi vessel to USCG, COI (Certificate of Inspection) standards, owner never completed the COI process for this particular vessel, however, inclining and stability tests were conducted.
ELECTRA (25 ft x 20 passenger model), during the 2005 TransPac Ocean Race festivities, singularly transported 2,340 people in six days. While operating 14 hours per day, non-stop, only 28% of the stored battery capacity was consumed while shuttling 13 to 17 passengers every trip at cruising speeds.
Some ideas for commercial adventures:
Harbor tours, watching Friday Nite Race start/finish, a “Green Flash” outing, an “under the Fireworks” cocktail ride, bottom fishing outside the channel, and/or a snorkel dive in the bite would all make for a good variety of applications with 1 to 3 hour agendas.
Aloha! We look forward to working with you and helping make your dreams come true.
Come have a look at the Waikiki Yacht Club!
Please contact John Dukesherer at 808-528-(BOAT) 2628
Дополнительные спецификации, оборудование и информация:
Название яхты
Electra
Спецификации
Верфь: Brookins Boatworks
Дизайнер: Gary Brookins
Страна приписки: Соединенные Штаты Америки
LOA: 25 ft Beam: 8 ft Draft: 20” dry & 24” fully loaded
Cold-molded epoxy hull w three diagonal Mahogany laminates, sheathed with 3 laminates fiberglass externally and 2 laminates internally; hull thickness approx. 5/8”
Deck: 3/8” marine Mahogany ply, sheathed w epoxy/fiberglass & coated with AwlGrip topcoat/non-skid
Interior Work Deck: 3/8” marine Mahogany subdeck, sheathed with 3/8” quarter-saw clear Fir deck planking; AwlGrip 545 primer & topcoat w non-skid
Port & Stb’d full-length positive buoyancy chambers makes the vessel unsinkable
Wrap-Around bench seating to compliment 20 persons, with PFD storage hammock under bench seats; 30 jackets capable; AwlGrip smooth finished
Cockpit Coaming in 3/8” marine plywood; fiberglass sheathed interior and 5/16” Sapelle Mahogany bead-board sheathed externally; stained and AwlGrip clear finished
Full length keel/skeg with propeller and rudder guard/strut
Collision bulkhead forward at 15% of waterline length
No below water line thru hull required
Bow U-bolt at waterline for trailing pulling and/or anchoring/towing
12ea AGM gas & acid free batteries in contained battery compartment; 3 batteries per bank
Fore & aft mooring cleats (centered); capable for hanging the boat from ….literally; chrome plated bronze
2ea amidships mooring cleats; 316SS
2ea bow and 2ea stern mooring chocks; 316SS
48V ELCO electric drive w 18”D x 18”P 4-blade BNZ propeller, LH rotation (Note: Elco has been building electric drives since 1892 and is a top seller of marine electric drives to this day; google them)
1 1/8” Aquamat 21 SS propeller shaft w zinc anode swiper protection
PSS dripless shaft gland by PYI
18” D x 18” P 4-blade NiBrAl Bronze propeller; LH rotation w zinc anode nut protection
Fiberglass composite rudder with SS 1” rudder shaft w removable Bronze lower bearing and Bronze upper bearing/packing gland (above waterline)
Teleflex push/pull cable steering with Edson Bronze 6-spoke steering wheel; teak spoke type
Pettit 2000E barrier/primer coated bottom (epoxy boat Do Not blister)
3 coats Trinadad black anti-fouling paint
Hull sides/Deck/interior/canopy all AwlGrip 545 primed and 3 topcoats each
1.5” x 2.5” D-section commercial grade rub-rail
3’ x 5’ yacht Ensign w Teak flag staff and SS transom socket + flag storage clips in canopy
Club Burgee pole; Teak w fw’d socket + flag storages clip in cabin
Hard mount 12V horn; fw’d/port inside canopy
2ea 1500 gph 12v automatic bilge pump systems
Auxiliary hand bilge pump (stowed under fw’d/port bench seat)
3ea ABC fire extinguishers
Teak ventilation gratings in forward removable deck plates; centerline section
Telescoping boathook (stowed under fw’d counter)
2ea telescoping paddles/boathooks (stowed under fore deck)
Danforth anchor w chain lead & 150 ft rode (stowed under fordeck in portable crate); bronze bow anchoring chock
Cold-Molded hard canopy; Mahogany ply sheathed with epoxy/fiberglass; Awlgrip primed & topcoat
Port/Stb’d/Steaming/Stern navigation lights w Mahogany side boards for side lights; hard canopy mounted
Hinge down 360 degree anchor light; hard canopy mounted
Hinge down VHF antenna; hand canopy mounted
Forward service counter w drains for food and beverage prep, w Sunberella cover and ; service ice box under
24” throwing device (life ring) w 50 ft tether line and vessel name on ring; SS storage rack on helm station
2ft x 2ft removable aft deck panel for easy access to PSS gland, shaft anode, etc
Helm Station (hinged to provide 100% access to drive system and associated controls and cabling):
48V power master switch and system fusing
Elco hermetically sealed throttle/shifter control w protector guard rail
Xantrex LINK 10 power monitor/throttle/range monitor
On/Off power key w power on indicator light
12V power master switch and system fusing
12V Horn & button
BlueSea 6-switch waterproof & fused 12V distribution panel
VHF radio
12V fused sub-bus panel specific to electronics (stero/VHF/USB outlet/horn) + fused 24/7 power feed to stero
Antenna splitter providing antenna coverage to stereo & VHF
AM/FM/Blue Tooth stereo w 4 water proof speakers
2 outlet USB charging port for cel phones, etc
Flip to dash provide comprehensive access to all 12V systems
ALL wiring meets ABYC & USCG standards, w ALL connections treated with dielectric coating
Wicker helm seat w Burgundy Red velvet cushion
Front & Center “Princess” seat on fw’d side of Helm station; provides access to battery charging systems
2ea 2ft x 4ft throw carpets
5ea 5/8” braid mooring lines
3ea 8” x 24” Taylor fenders w lanyards
6ea PFDs.
Safety/Signal Kit (box) w new flares, mirror, whistle, horn
Tool box in storage shelf/rack for miscellaneous gear under port fore deck
2 plastic storage boxes on elevated/securing blocks
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
(remove)
