2016 Seascape 24 008

Дополнительные спецификации, оборудование и информация:

CONSTRUCTION

• Hull and deck constructed with vacuum infusion of Vinyl ester resin, Airex
  PVC foam and Soric GRP sandwich with unidirectional and multiaxial
  laminates
• Hull reinforced with infused GRP stringers in keel and in bow sections
• Deck comes with high traction non-skid moulded nonslip
• Two transom hung rudders built of GRP foam sandwich and aluminium
  casings,
• Hull and deck are moulded in single tone off-white RAL 9003

VINYL WRAP

• Custom vinyl wrap in metallic green with Seacape 24 logo 

KEEL ARRANGEMENT

• Swing keel built in GRP vinyl ester composite with lead bulb insert
• Keel edges are protected with epoxy primer
• Manually operated stainless steel custom built worm drive winch
• Slotstrip keel lips closing the exit of the keel box

UPGRADE TO HIGH RAILING WITH PULPIT

• 45cm high pushpit and stanchions
• additional pulpit of the same height

SINGLE POINT LIFT SYSTEM

• Custom 3 part lifting strop
• Centre lift point above the centreboard
• Lift the boat with the mast in

A-FRAME MAST HOIST SYSTEM

• Enables stepping of the mast without a crane
• Lightweight aluminium powder coated A-frame
• Spliced dyneema ropes with hooks for aft support

INTERIOR

• Bulkheads and furniture lightly covered with satin finish top paint and white RAL 9003 gel coat on the moulded parts for light, clean and low maintenance finish
• Forward part: double v-berth with sealed buoyancy tanks beneath, light and ventilation through big 580mm opening hatch, cushions for the V berth 
• Central part:  light and spacious main cabin area with large companionway hatch, a numeric lock for the main companionway, long berths/benches with storage lockers under the first 1.5m and sealed buoyancy tanks under the rest, two multi-purpose sliding steps, left and right of the keel-box, full-length cushions for the berths, small cushions for the sliding step for widening the berth, plexiglas companionway washboard and sliding hatch, EVA foam padding protection on the floor
• 4 Seascape branded "crew" storage bags
• Chemical toilet
• Wood table - can fit in the cabin or cockpit with storage bag

MAST & RIGGING

• Compotech mast and boom with one set of swept back spreaders built in
  high-quality carbon fibre
• Carbon parts UV lacquer protection
• Continuous 1x19 standing rigging with bottle screw adjusters
• Boom with 1:8 outhaul and two reefs
• 1:12 boom vang
• Retractable carbon bowsprit controlled from the cockpit
• Tapered mainsheet with mainsheet tackle of ball bearing low• friction blocks
• Two jib sheets
• one 1:2 dyneema main halyard
• one dyneema jib halyard
• one dyneema fractional spinnaker halyard
• two reef lines
• one bowsprit control line
• one spinnaker tack line
• two tapered spinnaker sheets
• one 1:8 cunningham control line
• Windex at masthead

GENNAKER BARBOUR HAULER SYSTEM

• Masthead and fractional position led back to cockpit clutches

CLASSIC JIB HOIST SYSTEM

• Dyneema jib halyard,
• Additional sheave block in the mast and spinlock jammer on the coachroof
• Bartels deck furler and swivel

SAILS

• North Sails main – 24m2, pentex, triradial cut, with two reefs and bolt rope

• North Sails J1 jib – 16m2, pentex laminate, triradial cut with vertical battens and zipper along the luff
• North Sails J2 heavy weather jib with vertical battens and zip luff
• North Sails gennaker – 63m2,norlon 75, Red
• North Sails Code 5 reaching spinnaker with Facnor FX1500 furler, 40m2, Norlon 150, Red

NEW SAILS

• North Sails Mainsail, J1 jib and white gennaker available fpr £4500 inc VAT

COVERS

• Mainsail cover
• Jib sock zip up cover
• Padded rudder bags
• "Pigouts" padded rail coves
• Mast, boom, spreaders and shroud transport covers

DECK EQUIPMENT

• Stainless steel, pushpit and four stanchions with lifelines
• Stainless steel bow and stern mooring cleat
• Stainless steel chainplates for shrouds and forestay
• Coachroof mounted opening hatch 580 cm x 58 cm for access to the cabin
• 2 Harken STA20 winches on the coachroof
• 2 Ronstan jib tracks with blocks on coachroof
• Spinlock clutches for halyards and control lines
• Ronstan blocks and cleats for other controls
• Uprated Ronstan ratchet blocks for spinnaker
• Carbon look tiller with Ronstan tiller extension
• 2 Seascape branded rope bags
• Tempered glass windows on each side of the coachroof
• Stern storage with two access hatches in cockpit
  

NAVIGATION PACK

• Garmin echoMAP 55dv Colour GPS charplotter / sonar (detachable)
• Built in gchart UK and Ireland maps
• Garmin mounted on adjustabke swing out bracket

RAYMARINE WIRELESS INSTRUMENTS with NMEA connectivity

• Wireless Speed, Depth, Wind and NMEA System
• T110 single line multifunctional wireless display
• T111 dual line multifunctional wireless display
• T112 analogue wind wireless display
• T120 Wireless wind transmitter
• T121 Hull transmitter
• T122 Wireless interface (Micro talk micronet to SeaTalk NG gateway)
• Airmar UST800 ultrasonic smart sensor (boat speed) no paddle wheel
• P79 in hull depth transducer
• Actisense NMEA0183 to NMEA2000 converter

GENERAL

• Custom carbon mast bracket for up to 4 Wireless displays
• Masthead tricolour navigation/anchor lights with switches on the control panel

ELECTRIC PACK 12V/18W

• Custom control switch panel under the companionway
• Volt meter in switch panel
• NASA BM1 battery monitor
• AGM 12V/33Ah battery
• 12V/18W solar panel in front of the mast with appropriate regulator
• Double USB outlet
• 12V outlet

• Interior indirect LED lighting
• Sentinel GSM/GPS boat monitor device monitoring unwanted access (magnetic door sensor), prevent battery damage, log your trip and keeptrack of all your routes, mileage, duration and speed
• 230V shorepower system
• 230V battery charger
• 230V outlet in cabin
• Shorepower lead

• Winch handle
• Horseshoe lifebuoy
• Fenders and warps
• Anchor chain and warp
• Bucket

REMOVABLE ENGINE BRACKET

• Removable engine bracket mounted on the stern of the boat with reinforcing
  backplate

TRAILER WITH EQUIPMENT

• Single axle braked trailer with low profile tyres for easier slipway launching
• Integrated brake drum flushing system
• Mast support with winch for launching/recovering the boat
• Custom GRP cradles
• Rubber rollers and pads in front – again for easier slip launching
• Spare tyre
• Transport straps with pads and light board

TECHNICAL DATA
• Length: 7,29 m
• Width: 2,50 m
• Light displacement: 890kg
• Main sail area (laminate): 24 m2
• Jib area (laminate): 16 m2
• Gennaker (nylon): 63 m2
• Draft (standard keel): 2 m / 0,25 m
• Draft (shallow keel): 1,1 m / 0,3 m
• Keel weight (standard keel): 320 kg
• Keel weight (shallow keel): 430 kg
• Mast height above the deck (carbon fibre): 10,00 m
• Air draft: 11,26 m
• Height on trailer: 2,80 m - w/o mast 2,10 m
• Length with trailer: 10 m - w/o mast 8,90 m
• Boom (carbon fibre): 350 cm
• Bowsprit (carbon fibre): 2,08 m
• Insubmersibility volume: 1,6 m3
• CE design category: C
• Nautical design: Manuard YD
• Product design: GIGODESIGN